If your iPhone 7 won’t turn on, there are a few things you can try. These include restarting your device, connecting it to iTunes and putting your iPhone into recovery mode.
If those steps don’t work, your iPhone may have a problem with its battery or charging port. If that’s the case, it may be time to consider getting a new phone.
Press and hold the Power button
If you have a frozen iPhone 7 that won’t turn on, there are a few things you can try. These include performing a force restart and draining your iPhone’s battery. However, if these methods don’t work, you can call an Apple repair technician to help get your device back to working order.
First of all, you need to press and hold the Power button on your device. This button is found on the right side or the top of most iPhones, depending on their age and size.
This will switch your device off and a spinner will display on the screen. When the phone has fully shut down, the spinner should disappear. If it doesn’t, you can use the slide to power off method to turn off your iPhone 7.
Another option is to perform a hard reset. This is a process that can be used to fix many common iPhone issues. It’s also a good idea to perform a deep restore (DFU) as it can help fix more complicated issues caused by software corruption within individual Settings app files or problems with the iPhone’s firmware.
When you restart your iPhone, it will run through a series of commands that start with an attempt to load the iOS operating system. This can sometimes help fix any problems, especially if you have a software glitch that’s preventing the iPhone from turning on or turning off.
The most important thing to remember when performing a hard reset is that you need to make sure your iPhone is completely powered down before you restart it. This will ensure your device won’t damage any components and that all of your personal data is protected from loss.
If you aren’t sure how to do this, there are some videos online that can teach you the steps. You can also consult your smartphone’s manual for more details.
If none of these methods work, you can call an Apple repair technician or visit their official support website to arrange a service. You can choose from a variety of different service types to suit your needs and budget.
Press and hold the Volume Up button
A broken volume button is a pain, especially if it happens while you’re trying to listen to music or make a phone call. However, there are a few solutions that can help you get back to normal.
First, you should clean your volume buttons. This is usually done by scrubbing the controls with cotton buds and water. While this doesn’t work in every case, it’s a good idea to do so at least once a month to keep your iPhone working properly.
If the issue isn’t fixed after cleaning, you may need to get your iPhone repaired. If you’re covered by Apple’s warranty, a Genius at your local Apple Store can repair your device for free. Otherwise, it can be expensive to repair an iPhone out of warranty.
Another solution is to perform a hard reset on your iPhone. This will reload the operating system and help your device to regain its full functionality. You’ll need to back up your iPhone and erase all content before performing this reset, but it should get your device running again.
One of the easiest ways to reset your iPhone is by entering recovery mode in Finder or iTunes. This will force your phone to reset itself, restoring it to its default settings and removing any unneeded data.
Alternatively, you can put your iPhone in DFU (device firmware update) restore mode and use it to reload the iOS software. This is the deepest type of restore you can do, and it’ll fix your iPhone’s software if it’s infected with a virus or a serious bug.
In many cases, this will restore the volume buttons to their original functionality, allowing you to adjust your media, ringers, and alerts without having to touch the volume buttons. You can also turn on the Change with Buttons switch to let the iPhone’s volume buttons do other things, like open a menu to control your volume or have them automatically turn up and down when tapped.
If your buttons are still stuck, you can try putting your iPhone in DFU mode or using AssistiveTouch to give you some extra control over them. AssistiveTouch is a virtual button that can be used to open a menu or control your device’s volume levels with a single tap.
Press and hold the Volume Down button
Sometimes the volume buttons on your iPhone 7 will stop working, and it’s difficult to turn the device on. Fortunately, there are a few simple ways to get your iPhone back up and running again.
First, you can try to force restart the device, which should work with almost all iPhone models. This method requires you to press and hold the Sleep/Wake button and the Volume Down button at the same time for about ten seconds.
If these steps don’t work, the next step is to enter recovery mode. This will allow you to update or restore your iPhone, which should help fix any problems that are preventing it from turning on.
However, you should be aware that doing this will also reset your iPhone to factory conditions. This means you will lose all of your settings and files, so be sure to back them up somewhere before doing this.
Another option is to try to get into diagnostics mode. This is a bit tricky, as it involves plugging your iPhone into a computer with a USB cable.
Once you’ve done this, iTunes will prompt you to put your phone in recovery mode. When the Connect to iTunes screen appears, release the home button.
If this doesn’t work, you might need to try to do a hard reset. This is a little less straightforward, but should also work, as it forces your iPhone to start over and unfreeze any frozen software.
Before trying this, though, you should make sure that the problem isn’t software-related. If you suspect that your iPhone’s software is at fault, it may be best to contact Apple Support instead of trying to fix it yourself.
If the above options don’t work, you might have a stuck or stiff volume button that needs to be repaired. This can be caused by a variety of factors, including dust, waxes, and other debris.
Press and hold the Sleep/Wake button
If your iPhone 7 won’t turn on or it suddenly stops working, you may be wondering what’s wrong with it. This could be the result of a software glitch, or you may need to get it fixed by an Apple service center.
Regardless of the reason your iPhone 7 isn’t working, you can try restarting it to see if that solves the problem. This will also reset any minor performance issues or application glitches you might be having. Once it has restarted, you can use your passcode or Touch ID to unlock your iPhone and check the home screen, apps, and settings to make sure everything is working properly.
To do this, press and hold the Sleep/Wake button on your iPhone 7. If you’re using an older model, you’ll need to press and hold the Volume Up and Volume Down buttons at the same time.
Once the Apple logo appears, release both buttons. You can also force restart an iPhone 7 by pressing the Home button and the Power button together until it reboots.
For an iPhone 6S (or earlier) or an iPhone SE, press and hold the sleep/wake button and the Home button at the same time until the Apple logo appears. Once the Apple logo appears, release both buttons and wait for your device to restart.
The Sleep/Wake button can be used to turn on or wake up your iPhone, lock it, and even turn off the display. You can even set it to automatically lock the display when you don’t touch it for a minute or so.
You can also use it to change the screen sensitivity. You can choose a higher sensitivity for faster response, or a lower one to save battery.
To change the sensitivity, you can go to Settings > General > Accessibility. You can then choose a higher or lower sensitivity for the screen and the keyboard.
You can also find out which apps are hogging all your battery by turning on “Battery Usage.” This will show you all the apps that are using a lot of power. It might not be a bad idea to delete those apps if you’re running out of battery quickly.